Worldwide Staffing

Worldwide Staffing Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Worldwide Staffing, Recruiter, 12 Suikerriet Street, Mbombela.

We supply integrated human capital solutions, coupled with our experience and expertise within temporary employment services and outsourcing solutions, which sets us apart as your trusted and compliant partner.

SMT LINE OPERATOR | INSPECTOR WANTEDRANDBURG, JOHANNESBURG REFERENCE NUMBER: 1352626SMTRAExciting opportunity available ...
08/06/2026

SMT LINE OPERATOR | INSPECTOR WANTED
RANDBURG, JOHANNESBURG
REFERENCE NUMBER: 1352626SMTRA
Exciting opportunity available for a resilient candidate who can solve problems with out-of-the-box thinking

MINIMUM REQUIREMENTS
2 - 4 years’ experience in a similar role in a SMT Department
Matric and /or a suitable qualification coupled with skills to perform required programming job

DUTIES AND RESPONSIBILITIES
Component Values
• Identify resistors, capacitors, transistors, sizes, and polarized components
• Read and understand part numbers and descriptions
• Sort components correctly and handle polarity-sensitive parts
• Count completed boards/cards and reconcile with pick-slip before transfer
Feeder Setup
• Load components onto the correct feeders and set pitch accurately
• Assemble stick feeders and teach pickup positions
Screen Print Setup
• Start machine, load program, and secure screen and PCB
• Align screen and PCB, set height, and configure alignment points
• Clean screens after each shift
Machine Setup
• Load correct programs and locate component positions
• Change feeder positions and set support pins
• Switch between reel and tube feeding and teach pickup positions
• Skip components/boards and troubleshoot first-off assemblies
Machine Operation
• Perform machine and feeder setup safely
• Adjust component placement and resume interrupted jobs
• Resolve machine errors or communicate issues to technicians
• Maintain efficient operation with minimal component waste
Oven Setup
• Perform startup, profile loading, cooldown, and shutdown procedures
• Adjust conveyor width and set CBS
Machine Programming
• Modify programs and optimize assembly performance
QC Inspection
• Identify solder defects, polarity issues, and component markings
• Repair faults using correct tools without damaging assemblies
• Solder and de-solder fine-pitch and under-device components
Kit Preparation
• Read and understand part numbers and descriptions
• Calculate quantities and manage shortages
• Understand BOMs, tolerances, and picking controls
• Return components to correct storage locations
Hand Soldering & Rework
• Repair open circuits, shorts, tombstones, and component faults
• Rework chip components, transistors, and solder joints
• Remove and replace SOIC, QFP, BGA, and other multi-leaded devices to IPC standards

GENERAL
The above mentioned duties reflect the position’s essential functions but does not contain all of the tasks that will be assigned.

Should you not receive a response within one week of applying, please consider your application unsuccessful.

Getting a job with us is free. We strive to find you the best job possible, so please don't pay anyone to do that.

Closing date: 12 June 2026

REGISTER YOUR CV WITH US today to apply for this exciting opportunity.
EMAIL your CV to [email protected] and use 1352626SMTRA as reference in the REFERENCE field.

PLASTIC INJECTION MOULDING SHIFT OPERATOR/SETTER WANTEDRANDBURG, JOHANNESBURGREFERENCE NUMBER: 1351626PLARAExciting oppo...
08/06/2026

PLASTIC INJECTION MOULDING SHIFT OPERATOR/SETTER WANTED
RANDBURG, JOHANNESBURG
REFERENCE NUMBER: 1351626PLARA
Exciting opportunity available for a resilient candidate who can solve problems with out-of-the-box thinking

MINIMUM REQUIREMENTS
Matriculated with an acumen for operating Injection Moulding machines.
Previous injection moulding or manufacturing experience advantageous.
Shift work compulsory; Be willing to work overtime when required.
Ability to work in a fast-paced & high-pressure production environment.

DUTIES AND RESPONSIBILITIES
Production and Machine Operations
Achieve production targets, cycle times, and shift output requirements.
Assist with machine and mould setups only when trained and authorised.
Complete daily production and shift handover records accurately (manual or Shopware systems).
Load raw materials into hoppers and ensure correct material identification and handling.
Operate plastic injection moulding machines in accordance with approved work instructions and
Operate printing and secondary processing equipment (pad printing, hot foil, trimming, packaging,
Remove finished components and conduct in-process visual inspections.
rework) as required.
setup sheets.

Quality Control
Follow standard work instructions and quality control procedures at all times
Identify and report moulding defects including short shots, flash, sink marks, warpage, burns, and contamination
Record quality checks and production data accurately
Segregate and clearly identify non-conforming parts

Safety, Health & Environment
Comply fully with all safety rules, procedures, and PPE requirements
Maintain housekeeping standards in line with 5S requirements
Perform basic machine cleaning and routine checks as instructed
Report unsafe conditions, near misses, incidents, or equipment faults immediately

Equipment & Escalation
Do not adjust machine parameters unless authorised
Report mould, machine, auxiliary equipment, or process abnormalities to supervision immediately
Support maintenance and setters by providing accurate fault descriptions
Perform any other work-related duties and responsibilities that may be assigned by management.
Perform administrative tasks such as daily target sheets and usage reports

GENERAL
The above mentioned duties reflect the position’s essential functions but does not contain all of the tasks that will be assigned.

Should you not receive a response within one week of applying, please consider your application unsuccessful.

Getting a job with us is free. We strive to find you the best job possible, so please don't pay anyone to do that.

Closing date: 12 June 2026

REGISTER YOUR CV WITH US today to apply for this exciting opportunity.
EMAIL your CV to [email protected] and use 1351626PLARA as reference in the REFERENCE field.

STOREMAN RAW MATERIAL STORES WANTEDRANDBURG, JOHANNESBURG REFERENCE NUMBER: 1350626STORA Exciting opportunity available ...
08/06/2026

STOREMAN RAW MATERIAL STORES WANTED
RANDBURG, JOHANNESBURG
REFERENCE NUMBER: 1350626STORA
Exciting opportunity available for a resilient candidate who can solve problems with out-of-the-box thinking

MINIMUM REQUIREMENTS
A valid forklift licence would be an advantage
Ability to maintain the highest level of quality and workmanship
Computer literate (Warehouse management system)
Functional knowledge of computer use is required
Matric with previous experience in a similar field
Must work shifts; and overtime when required
SAP scanning experience would be an advantage

DUTIES AND RESPONSIBILITIES
Checking stock quantities and order validity of all components received from suppliers
Communicating effectively with all production staff and stock operating personnel
Maintaining accurate stock controls and ensuring that the physical and electronic stock levels are always in sync
Other general store duties
Packing equipment as per requirement from production facilities
Performing stock-take functions on a regular basis
Picking equipment as per picking list issued by the production foreman / factory manager or sales offices
Stores personnel must be prepared to work overtime to process late/ urgent orders that require picking, packing and issuing on the same day
Stores personnel must keep their work area and stores neat and tidy

GENERAL
The above mentioned duties reflect the position’s essential functions but does not contain all of the tasks that will be assigned.

Should you not receive a response within one week of applying, please consider your application unsuccessful.

Getting a job with us is free. We strive to find you the best job possible, so please don't pay anyone to do that.

Closing date: 12 June 2026

REGISTER YOUR CV WITH US today to apply for this exciting opportunity.
EMAIL your CV to [email protected] and use 1350626STORA as reference in the REFERENCE field.

MECHANICAL ASSEMBLER WANTEDRANDBURG, JOHANNESBURG REFERENCE NUMBER: 1347626MECRAExciting opportunity available for a res...
08/06/2026

MECHANICAL ASSEMBLER WANTED
RANDBURG, JOHANNESBURG
REFERENCE NUMBER: 1347626MECRA
Exciting opportunity available for a resilient candidate who can solve problems with out-of-the-box thinking

MINIMUM REQUIREMENTS
2 - 4 years’ experience in a similar role
Experience in the assembly of simple mechanical components
Knowledge of mechanical components (fasteners, bearings etc.)
Matric and /or a suitable technical qualification in mechanical or disciplines

DUTIES AND RESPONSIBILITIES
Adhering to general health and safety and housekeeping rules (5S’s)
Completing relevant production documentation correctly
Maintaining assembly equipment and work area in a pristine condition
Producing quality product in the right quantities by the required time
Reading and implementing assembly instructions and to be able to assemble from samples and drawings
Testing products by using testing equipment (Dyno’s/Jigs)
Understanding of the requirement to fulfil goals and targets
Working in an orderly and neat fashion

GENERAL
The above mentioned duties reflect the position’s essential functions but does not contain all of the tasks that will be assigned.

Should you not receive a response within one week of applying, please consider your application unsuccessful.

Getting a job with us is free. We strive to find you the best job possible, so please don't pay anyone to do that.

Closing date: 12 June 2026

REGISTER YOUR CV WITH US today to apply for this exciting opportunity.
EMAIL your CV to [email protected] and use 1347626MECRA as your reference in the REFERENCE field.

ELECTRONIC ASSEMBLER WANTEDRANDBURG, JOHANNESBURGREFERENCE NUMBER: 1349626ELERAExciting opportunity available for a resi...
08/06/2026

ELECTRONIC ASSEMBLER WANTED
RANDBURG, JOHANNESBURG
REFERENCE NUMBER: 1349626ELERA

Exciting opportunity available for a resilient candidate who can solve problems with out-of-the-box thinking

MINIMUM REQUIREMENTS
Grade 12 or equivalent
2 – 3 years’ previous experience in an electronic manufacturing environment
Understanding of OHS (5S’s) and quality concepts

DUTIES AND RESPONSIBILITIES
Follow assembly instructions
Assemble from a sample or drawing meet
Correctly identify electrical components, component polarity and colour coding of resistors
Populate electronic components correctly on a circuit board
Be competent in the use of hand soldering equipment
Trim and clean boards after soldering
Must be competent in the use of relevant hand tools and assembly jigs
Must be competent in the use of relevant test jigs
Perform basic fault finding and inspection of boards
Should know and understand the procedure when assemblies pass and fail
Performing basic mechanical assemblies associated with electrical assemblies (i.e. heat sinks, battery chargers, enclosures)
Following standard assembly instructions
Adhering to general health and safety and housekeeping rules

GENERAL
The above mentioned duties reflect the position’s essential functions but does not contain all of the tasks that will be assigned.

Should you not receive a response within one week of applying, please consider your application unsuccessful.

Getting a job with us is free. We strive to find you the best job possible, so please don't pay anyone to do that.

Closing date: 12 June 2026

REGISTER YOUR CV WITH US today to apply for this exciting opportunity.
EMAIL your CV to [email protected] and use 1349626ELERA reference in the REFERENCE field.

CNC AUXILIARY OPERATOR WANTEDRANDBURG, JOHANNESBURGREFERENCE NUMBER: 1348626CNCRAExciting opportunity available for a re...
08/06/2026

CNC AUXILIARY OPERATOR WANTED
RANDBURG, JOHANNESBURG
REFERENCE NUMBER: 1348626CNCRA

Exciting opportunity available for a resilient candidate who can solve problems with out-of-the-box thinking

MINIMUM REQUIREMENTS
NQF level 4 coupled with 2-4 years relevant experience in a CNC / mechanical manufacturing environment.
Ability to operate a variety of manual / semi auto machines.

DUTIES AND RESPONSIBILITIES
Assisting with and changing over of all auxiliary machines.
Operating Band saw and other auxiliary machines, as and when required.
Ensuring all components conform to drawing specs by carrying out quality checks during production.
Assisting with material movements in the department.
Keeping work area tidy and clean as per 5s standards.
Carrying out any other relevant tasks as instructed by the Foreman
Assisting with topping up machines with coolant and oils.

GENERAL
The above mentioned duties reflect the position’s essential functions but does not contain all of the tasks that will be assigned.

Should you not receive a response within one week of applying, please consider your application unsuccessful.

Getting a job with us is free. We strive to find you the best job possible, so please don't pay anyone to do that.

Closing date: 12 June 2026

REGISTER YOUR CV WITH US today to apply for this exciting opportunity.
Submit CV: [email protected] and use 1348626CNCRA as reference in the REFERENCE field.

28/05/2026

Effective compliance supports consistency, reduces risk and strengthens workforce performance across operations.
Discover the insight - https://shorturl.at/GHnMV

⚠️ SCAM ALERT ⚠️We have become aware of fraudulent job advertisements circulating on WhatsApp under the name of Worldwid...
26/05/2026

⚠️ SCAM ALERT ⚠️
We have become aware of fraudulent job advertisements circulating on WhatsApp under the name of Worldwide Staffing. Please note that we do NOT recruit via WhatsApp, and we will never conduct job applications, interviews, or requests for personal information through WhatsApp messages.

All legitimate job opportunities are only shared through our verified Facebook and LinkedIn pages. Jobseekers are strongly advised to remain vigilant and avoid engaging with any individuals or groups making recruitment claims via WhatsApp or unofficial channels.

To ensure your safety, always follow and apply through our verified recruitment platforms on Facebook and LinkedIn. If you receive suspicious messages or job offers, please report them immediately.

25/05/2026

Without proper compliance oversight, workforce risk increases.
A structured approach ensures alignment with bargaining council requirements and reduces exposure.
Explore the article - https://shorturl.at/GHnMV

21/05/2026

Workforce partnerships should be evaluated on more than cost.
Compliance plays a critical role in protecting operations and ensuring long-term sustainability.
Read more - https://shorturl.at/GHnMV

Address

12 Suikerriet Street
Mbombela
1201

Opening Hours

Monday 08:00 - 16:30
Tuesday 08:00 - 16:30
Wednesday 08:00 - 16:30
Thursday 08:00 - 16:30
Friday 08:00 - 16:30

Telephone

+27871359313

Website

Alerts

Be the first to know and let us send you an email when Worldwide Staffing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Worldwide Staffing:

Shortcuts

Share

Category