Pinnacle Staffing -Asheville

Pinnacle Staffing -Asheville A branch of Pinnacle Staffing serving the Asheville area for over 20 years.

06/04/2020

Work Schedule:
Sunday through Thursday or Tuesday through Saturday (3:00PM to 11:30PM) Overtime may be required on weekends.
Staring wage: 14.15 Hr.

GENERAL DESCRIPTION OF POSITION
Produce quality dry-pressed technical ceramic products that meets or exceeds customer expectations for quality, quantity, and on time delivery. Operates powder compaction machines in the dry press area.
(Tasks listed are intended to be descriptive and not restrictive. An employee in this position may perform any of the tasks listed; however, these examples do not include all the tasks which an employee may be expected to perform.)

REQUIREMENTS
High School graduate or GED preferred.
Basic knowledge of computer operation.
Must be able to work independently and carefully follow written and/or verbal instructions.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Run various pressed products on multiple machines and models.
Read hand held measuring instruments.
Read and understand job specific part dimensional specifications.
Maintain proper part specific press conditions per procedure (IE: green weight, thickness).
Properly load parts for kiln firing.
Must maintain SAP and press logs and other related paperwork as required.
Must visually inspect parts during operation for sticking and other defects.
Daily clean department and follow 5-S objectives set by supervisor.
Required to run 2 to 3 machines when necessary and must be able to stand for long periods unless the job permits otherwise.
Adhere to all plant wide safety and environmental regulations and objectives.
Other duties as assigned by supervisor.

COMMUNICATION SKILLS
Must be able to communicate by speech, writing and hearing in person and/or by phone in a businesslike, professional manner.

SOFTWARE SKILLS REQUIRED
Computer software including MS Office, Adobe, e-mail, SAP
PHYSICAL ACTIVITIES
Most work is completed on the production floor.
Most work is completed onsite.
Working hours are 8 hour shifts per schedule from supervisor with frequent weekend overtime required.
The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is continuously required to sit, talk or hear; frequently required to use hands to finger, handle, or feel; and occasionally required to stand, walk, reach with hands and arms, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, and color vision.

ENVIRONMENTAL CONDITIONS
There are not harmful environmental conditions that are present for this position. The noise level in the work environment is usually moderate.

ADDITIONAL INFORMATION
The above statements are intended to describe the work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. The duties and responsibilities of this position are subject to change and other duties may be assigned or removed at any time.

06/04/2020

OB SUMMARY:

The Operator is responsible for the production of ceramic parts and the safe operation of departmental equipment

JOB DUTIES (include the following: Other duties may be assigned)

• Monitor and document the operation of machines in a production environment. Maintain flow of production parts.
• Keeps area clean and free of obstacles;
• Visually inspects parts at every portion of the process with attention to detail and specified tolerances;
• May use measuring devices including micrometers and calipers;
• Maintain safety and Quality Assurance standards by knowing and applying proper procedures for operating the machines within the department.
• Assist Senior Operators, Technicians and Machinists as assigned.

SUPERVISORY RESPONSIBILITIES

This job has no supervisory responsibilities.

SKILLS, KNOWLEDGE, EXPERIENCE (requirements)

• High School Diploma preferred..
• Must be able to pass a criminal background check and drug screen;
• Ability to read and write and understand directions in English;
• Ability to comprehend simple instructions, short correspondence, and memos.

WORK ENVIRONMENT

• Most work is completed on the production floor and/or inspection room;
• Most work is completed onsite;
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Position is hourly and employee will use a timecard daily.

04/24/2020

JOB SUMMARY:

The Operator is responsible for the production of ceramic parts and the safe operation of departmental equipment

JOB DUTIES (include the following: Other duties may be assigned)

• Monitor and document the operation of machines in a production environment. Maintain flow of production parts.
• Keeps area clean and free of obstacles;
• Visually inspects parts at every portion of the process with attention to detail and specified tolerances;
• May use measuring devices including micrometers and calipers;
• Maintain safety and Quality Assurance standards by knowing and applying proper procedures for operating the machines within the department.
• Assist Senior Operators, Technicians and Machinists as assigned.

SUPERVISORY RESPONSIBILITIES

This job has no supervisory responsibilities.

SKILLS, KNOWLEDGE, EXPERIENCE (requirements)

• High School Diploma preferred..
• Must be able to pass a criminal background check and drug screen;
• Ability to read and write and understand directions in English;
• Ability to comprehend simple instructions, short correspondence, and memos.

WORK ENVIRONMENT

• Most work is completed on the production floor and/or inspection room;
• Most work is completed onsite;
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Position is hourly and employee will use a timecard daily.

04/24/2020

JOB SUMMARY:

The Operator is responsible for the production of ceramic parts and the safe operation of departmental equipment

JOB DUTIES (include the following: Other duties may be assigned)

• Monitor and document the operation of machines in a production environment. Maintain flow of production parts.
• Keeps area clean and free of obstacles;
• Visually inspects parts at every portion of the process with attention to detail and specified tolerances;
• May use measuring devices including micrometers and calipers;
• Maintain safety and Quality Assurance standards by knowing and applying proper procedures for operating the machines within the department.
• Assist Senior Operators, Technicians and Machinists as assigned.

SUPERVISORY RESPONSIBILITIES

This job has no supervisory responsibilities.

SKILLS, KNOWLEDGE, EXPERIENCE (requirements)

• High School Diploma preferred..
• Must be able to pass a criminal background check and drug screen;
• Ability to read and write and understand directions in English;
• Ability to comprehend simple instructions, short correspondence, and memos.

WORK ENVIRONMENT

• Most work is completed on the production floor and/or inspection room;
• Most work is completed onsite;
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Position is hourly and employee will use a timecard daily.

03/27/2020

Work Schedule:
Sunday through Thursday (3:00PM to 11:30PM) Overtime may be required on weekends.
Staring wage: 14.15 Hr.

GENERAL DESCRIPTION OF POSITION
Produce quality dry-pressed technical ceramic products that meets or exceeds customer expectations for quality, quantity, and on time delivery. Operates powder compaction machines in the dry press area.
(Tasks listed are intended to be descriptive and not restrictive. An employee in this position may perform any of the tasks listed; however, these examples do not include all the tasks which an employee may be expected to perform.)

REQUIREMENTS
High School graduate or GED preferred.
Basic knowledge of computer operation.
Must be able to work independently and carefully follow written and/or verbal instructions.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Run various pressed products on multiple machines and models.
Read hand held measuring instruments.
Read and understand job specific part dimensional specifications.
Maintain proper part specific press conditions per procedure (IE: green weight, thickness).
Properly load parts for kiln firing.
Must maintain SAP and press logs and other related paperwork as required.
Must visually inspect parts during operation for sticking and other defects.
Daily clean department and follow 5-S objectives set by supervisor.
Required to run 2 to 3 machines when necessary and must be able to stand for long periods unless the job permits otherwise.
Adhere to all plant wide safety and environmental regulations and objectives.
Other duties as assigned by supervisor.

COMMUNICATION SKILLS
Must be able to communicate by speech, writing and hearing in person and/or by phone in a businesslike, professional manner.

SOFTWARE SKILLS REQUIRED
Computer software including MS Office, Adobe, e-mail, SAP
PHYSICAL ACTIVITIES
Most work is completed on the production floor.
Most work is completed onsite.
Working hours are 8 hour shifts per schedule from supervisor with frequent weekend overtime required.
The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is continuously required to sit, talk or hear; frequently required to use hands to finger, handle, or feel; and occasionally required to stand, walk, reach with hands and arms, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, and color vision.

ENVIRONMENTAL CONDITIONS
There are not harmful environmental conditions that are present for this position. The noise level in the work environment is usually moderate.

ADDITIONAL INFORMATION
The above statements are intended to describe the work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. The duties and responsibilities of this position are subject to change and other duties may be assigned or removed at any time.

02/24/2020

Hours of work:
Friday through Sunday (5:00 AM - 5:30 PM) Paid 40 Hours
Staring wage: 14.50 Hr.

GENERAL DESCRIPTION OF POSITION
Produce quality dry-pressed technical ceramic products that meets or exceeds customer expectations for quality, quantity, and on time delivery. Operates powder compaction machines in the dry press area.
(Tasks listed are intended to be descriptive and not restrictive. An employee in this position may perform any of the tasks listed; however, these examples do not include all the tasks which an employee may be expected to perform.)

REQUIREMENTS
High School graduate or GED preferred.
Basic knowledge of computer operation.
Must be able to work independently and carefully follow written and/or verbal instructions.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Run various pressed products on multiple machines and models.
Read hand held measuring instruments.
Read and understand job specific part dimensional specifications.
Maintain proper part specific press conditions per procedure (IE: green weight, thickness).
Properly load parts for kiln firing.
Must maintain SAP and press logs and other related paperwork as required.
Must visually inspect parts during operation for sticking and other defects.
Daily clean department and follow 5-S objectives set by supervisor.
Required to run 2 to 3 machines when necessary and must be able to stand for long periods unless the job permits otherwise.
Adhere to all plant wide safety and environmental regulations and objectives.
Other duties as assigned by supervisor.

COMMUNICATION SKILLS
Must be able to communicate by speech, writing and hearing in person and/or by phone in a businesslike, professional manner.

SOFTWARE SKILLS REQUIRED
Computer software including MS Office, Adobe, e-mail, SAP

PHYSICAL ACTIVITIES
Most work is completed on the production floor.
Most work is completed onsite.
Working hours are 8 hour shifts per schedule from supervisor with frequent weekend overtime required.
The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is continuously required to sit, talk or hear; frequently required to use hands to finger, handle, or feel; and occasionally required to stand, walk, reach with hands and arms, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, and color vision.

ENVIRONMENTAL CONDITIONS
There are not harmful environmental conditions that are present for this position. The noise level in the work environment is usually moderate.

ADDITIONAL INFORMATION
The above statements are intended to describe the work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. The duties and responsibilities of this position are subject to change and other duties may be assigned or removed at any time.

02/24/2020

Work Schedule:
Sunday through Thursday (3:00PM to 11:30PM) Overtime may be required on weekends.
Staring wage: 13.90 Hr.

GENERAL DESCRIPTION OF POSITION
Produce quality dry-pressed technical ceramic products that meets or exceeds customer expectations for quality, quantity, and on time delivery. Operates powder compaction machines in the dry press area.
(Tasks listed are intended to be descriptive and not restrictive. An employee in this position may perform any of the tasks listed; however, these examples do not include all the tasks which an employee may be expected to perform.)

REQUIREMENTS
High School graduate or GED preferred.
Basic knowledge of computer operation.
Must be able to work independently and carefully follow written and/or verbal instructions.

ESSENTIAL DUTIES AND RESPONSIBILITIES
Run various pressed products on multiple machines and models.
Read hand held measuring instruments.
Read and understand job specific part dimensional specifications.
Maintain proper part specific press conditions per procedure (IE: green weight, thickness).
Properly load parts for kiln firing.
Must maintain SAP and press logs and other related paperwork as required.
Must visually inspect parts during operation for sticking and other defects.
Daily clean department and follow 5-S objectives set by supervisor.
Required to run 2 to 3 machines when necessary and must be able to stand for long periods unless the job permits otherwise.
Adhere to all plant wide safety and environmental regulations and objectives.
Other duties as assigned by supervisor.

COMMUNICATION SKILLS
Must be able to communicate by speech, writing and hearing in person and/or by phone in a businesslike, professional manner.

SOFTWARE SKILLS REQUIRED
Computer software including MS Office, Adobe, e-mail, SAP
PHYSICAL ACTIVITIES
Most work is completed on the production floor.
Most work is completed onsite.
Working hours are 8 hour shifts per schedule from supervisor with frequent weekend overtime required.
The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is continuously required to sit, talk or hear; frequently required to use hands to finger, handle, or feel; and occasionally required to stand, walk, reach with hands and arms, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, and color vision.

ENVIRONMENTAL CONDITIONS
There are not harmful environmental conditions that are present for this position. The noise level in the work environment is usually moderate.

ADDITIONAL INFORMATION
The above statements are intended to describe the work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. The duties and responsibilities of this position are subject to change and other duties may be assigned or removed at any time.

02/24/2020

Work hours/schedule : 6pm-2am Monday, Wednesday, Thursday, Friday and Saturday.

Job Description:
Position Summary: This position is accountable for the proper count and verification of all incoming and outgoing product loads as well as loading product on route or transport vehicles.

Key Job Responsibilities: Maintains a clean, safe, and secure environment. Monitors and verifies all shipped product quality that meets Bimbo Bakeries USA standards. Works cooperatively with co-workers. Notifies a supervisor or manager if there are issues regarding product shortages or quality. Accountable for the proper count and verification of all incoming and outgoing product loads and returns. Count & prepare proper loads, Break-down tray stacks of bread, muffins and bagels, etc. Arrange product for efficient loading and operational needs. Daily processing of required paperwork, including inputting any adjustments/shorts/overages, and verifying loads to account for all products, utilizing computer applications. May operate a route or transport truck, if applicable. Must be able to lift a maximum of 50 lbs. overhead. Must be able to stack product according to stacking procedures. Must be able to stand for long periods of time, climb, twist, etc. Other duties as assigned.
Key Behavioral Competencies: Attention to detail. Sets and maintains high performance standards. Maintains high level of productivity and self-direction.

Education: H.S. diploma or GED required.

Requirements: Must possess basic computer skills.

The supplier or non-employee is responsible for supplying non-disposable PPE.

Address

100 Industrial Drive
Hendersonville, NC
28791

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Pinnacle Staffing -Asheville posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category