Jobsrus.com- Detroit, MI

02/13/2024

JobsRUs.com is currently hiring for Production Operators for a plastic recycling company located in Dundee, MI.

* Previous experience working in a recycling facility is preferred.

Pay is $17.50 per hour.

Employees work a 12 hour shift, 3 to 4 days per week.

Shift schedules are:

Days: 7:00 AM - 7:00 PM

Nights: 7:00 PM - 7:00 AM

Essential Functions and Responsibilities:

Adhere to all safety procedures and practice good housekeeping.
Perform job duties in accordance with all written work instructions and procedures.
Operate and maintain equipment and forklifts used to manufacture products at acceptable quality and throughput levels per control plan.
Perform quality checks related to line operation.
As needed utilize manufacturing data systems to perform basic shop floor functions.
Respond to process control alarms, bringing processes back into control.
Disposition non-conforming product according to established criteria.
Coordinates the training sessions for all new hires in the department.
Identifies opportunities for departmental improvement.
Assists in changeovers, productivity and scrap.
Assists in training and mentoring as assigned.
Participate in Plant meetings.
Other duties as assigned.

Physical Demands and Work Environment:
* Lifting Requirements: 0 - 50 lbs.
* Constant: Lift and/or move up to 15lbs., driving of forklift
* Frequent: Sit, stand and walk up to 12 hours per day. Lift and/or move up to 50lbs.
* Environment: Exposed to high levels of noise, recyclable debris and smell.
* Able to visually examine minute defects in parts and products.
* Must be able to reach overhead, crouch/squat, kneel, climb ladders and/or stairs.
* Must wear proper Personal Protective Equipment: eye, ear, head and toe protection and
high visibility safety vest

Please email resume to: [email protected]

or give our office a call for an online application.

Call now to connect with business.

04/17/2023

CorTech Staffing is seeking detail-oriented Assemblers for a Grand Rapids, MI Company. Grow with a premier manufacturer! Opportunities to learn Fabrication, Mechanical Assembly, and more!

1st shift
5:30am - 4pm
Mon-Thur (Some overtime on Fridays)
$15.80-$16.80/hr depending on experience.

No experience is required except for a willingness to learn.

Call Thania Rodriguez at 779-368-0254 or email [email protected]

11/16/2022

CorTech is now hiring for Build Technicians for a well-known automotive parts manufacturing facility in Auburn Hills, MI.

This is a first shift position.

Shift schedule is Monday through Friday, 7:00 AM - 4:00 PM

As a Build Technician, you will work as part of a team in a manufacturing environment to produce high quality automotive parts which will become interior assemblies that meet company standards.

The primary duties of a Build Technician include, but are not limited to:
• Attending Daily Shift Meeting;
• Ensuring 100% delivery to customer;
• Working shifts and overtime as necessary;
• Ensuring health and safety requirements and procedures are adhered to.
• Carrying out Process to correct Quality and Production Standards within cycle time;
• Taking part and improving effectiveness using Lean Manufacturing methods;
• Installing and maintaining 5S standards;
• Escalating issues to Team Leader/ Shift Leader as necessary;
• Working flexibly in order to meet customer demands and needs;
• Ensuring Product Quality by following standards and inspection requirements
• Maintaining equipment in excellent working condition
• Understanding and behaving in accordance with company's code of ethics
• Reporting any concerns to supervisor
• Participating in training to understand and improve skills related to your position
• Additional Duties as assigned

An ideal Assembly Operator candidate will have:
• High School diploma or equivalent
• 6 Months Experience in production; automotive experience preferred
• Basic Comprehension of lean manufacturing techniques preferred
• Basic Reading Comprehension
• Basic Math Skills
• Ability to follow direction
• Attention to detail
• Flexible attitude toward continuous improvement
• Ability to work alone and as part of a team
• Ability to work and communicate effectively
• Ability to work under pressure to tight schedules
• Ability to work on any shift
• Ability to work overtime with little or no notice

Email resume to: [email protected]

Call 313-763-9993

11/16/2022

CorTech is now hiring for an Assembly Operator for a well-known automotive parts manufacturing facility in Fraser, MI.

This is a first shift position.

Shift schedule is Monday through Friday, 6:00 AM - 2:30 PM

As an Assembly operator, you will work as part of a team in a manufacturing environment to produce high quality automotive parts which will become interior assemblies that meet company standards.

The primary duties of an Assembly operator include, but are not limited to:
• Attending Daily Shift Meeting;
• Ensuring 100% delivery to customer;
• Working shifts and overtime as necessary;
• Ensuring health and safety requirements and procedures are adhered to.
• Carrying out Process to correct Quality and Production Standards within cycle time;
• Taking part and improving effectiveness using Lean Manufacturing methods;
• Installing and maintaining 5S standards;
• Escalating issues to Team Leader/ Shift Leader as necessary;
• Working flexibly in order to meet customer demands and needs;
• Ensuring Product Quality by following standards and inspection requirements
• Maintaining equipment in excellent working condition
• Understanding and behaving in accordance with company's code of ethics
• Reporting any concerns to supervisor
• Participating in training to understand and improve skills related to your position
• Additional Duties as assigned

An ideal Assembly Operator candidate will have:
• High School diploma or equivalent
• 6 Months Experience in production; automotive experience preferred
• Basic Comprehension of lean manufacturing techniques preferred
• Basic Reading Comprehension
• Basic Math Skills
• Ability to follow direction
• Attention to detail
• Flexible attitude toward continuous improvement
• Ability to work alone and as part of a team
• Ability to work and communicate effectively
• Ability to work under pressure to tight schedules
• Ability to work on any shift
• Ability to work overtime with little or no notice

Email resume to: [email protected]

Call 313-763-9993

11/15/2022

CorTech Staffing is currently hiring for experienced Leather Wrapping Technicians for a large, well known automotive parts manufacturing facility in Auburn Hills, MI.

** Must have prior work experience with leather an vinyl upholstering within the automotive industry. **

Work schedule is 7:00 am - 4:00 pm.

Job responsibilities include but are not limited to:

• Hand wrap install and secure leather and vinyl onto automotive interior assemblies (door panels, door bolsters, armrests, steering wheels, etc.)
• Secure materials by using hand tools, power tools, glue, cement, or staples.
• Hand trimming of parts using open razor blades, scalpels, etc.
• Careful use of heat gun to activate adhesives to ensure a sufficient bond without damaging
• Massaging/finessing of textiles to work out wrinkles, bridging, and alignment of seams, etc.
• Inspects parts for defects

Please email resume

11/01/2022

CorTech is currently hiring for Janitors for a facility maintenance company onsite at a major retailer in Canton, MI.

Job responsibilities include:

Keep assigned areas in clean and orderly condition.
Clean and stocking restrooms and breakrooms. Clean windows.
Sweep and mop floors. Vacuum and dust.
Remove trash and transport to proper disposal area.
Work successfully with fellow employees, clients, and all levels of the organization.
May perform other duties as assigned.

Email resume to: [email protected]

Call 313-763-9993

11/01/2022

CorTech is currently hiring for Bussers/Dishwashers for a facility maintenance company onsite at a major retailer in Canton, MI.

Job responsibilities include:

Keep dish area orderly and in compliance with safety standards.
Clean dishes by hand or place them in racks or on conveyor to dishwashing machine depending on assigned equipment.
Ensure complete cleanliness and sanitation. Wash pots, pans, and trays based on assigned procedure.
Sweep and mop kitchen floors to ensure compliance with safety and sanitation standards.
Transfer supplies and equipment between storage and work areas. Perform other duties as assigned.

Email resume to: [email protected]

Call 313-763-9993

11/01/2022

CorTech is currently hiring for Cart Attendants for a facility maintenance company onsite at a major retailer in Canton, MI.

Job responsibilities include:

Ensure the parking lot is clear of stray
carts.
Ensure all cart wells are not overflowing and organized by cart type.
Ensure baskets are staged for restaurant fill.
Ensure loading dock is clean and organized, dispose of cardboard as needed.
Ensure all customers have been helped in the loading area.
Check in radio and garage door opener where applicable.
Complete daily, weekly, monthly cleaning tasks as needed.
Ensure cardboard bin is empty and ready for night shift.
Check out with supervisor before leaving

Email resume to: [Email hidden]

Give our office a call at 313-763-9993

08/25/2022

CorTech is now hiring for an Assembly Operator for a well-known automotive parts manufacturing facility in Fraser, MI.

This is a first shift position.

Shift schedule is Monday through Friday, 6:00 AM - 2:30 PM

As an Assembly operator, you will work as part of a team in a manufacturing environment to produce high quality automotive parts which will become interior assemblies that meet company standards.

The primary duties of an Assembly operator include, but are not limited to:
• Attending Daily Shift Meeting;
• Ensuring 100% delivery to customer;
• Working shifts and overtime as necessary;
• Ensuring health and safety requirements and procedures are adhered to.
• Carrying out Process to correct Quality and Production Standards within cycle time;
• Taking part and improving effectiveness using Lean Manufacturing methods;
• Installing and maintaining 5S standards;
• Escalating issues to Team Leader/ Shift Leader as necessary;
• Working flexibly in order to meet customer demands and needs;
• Ensuring Product Quality by following standards and inspection requirements
• Maintaining equipment in excellent working condition
• Understanding and behaving in accordance with company's code of ethics
• Reporting any concerns to supervisor
• Participating in training to understand and improve skills related to your position
• Additional Duties as assigned

An ideal Assembly Operator candidate will have:
• High School diploma or equivalent
• 6 Months Experience in production; automotive experience preferred
• Basic Comprehension of lean manufacturing techniques preferred
• Basic Reading Comprehension
• Basic Math Skills
• Ability to follow direction
• Attention to detail
• Flexible attitude toward continuous improvement
• Ability to work alone and as part of a team
• Ability to work and communicate effectively
• Ability to work under pressure to tight schedules
• Ability to work on any shift
• Ability to work overtime with little or no notice

Please email resume to: [Email hidden]

Call 313-763-9993.

08/25/2022

CorTech is currently hiring for a Parts Clerk for a large automotive parts manufacturing facility in Fraser, MI

Work hours are 6:00 am - 2:30pm Monday through Friday.
Occasional overtime and weekends.

The main missions of the role are:

Properly load trucks for transportation and complete necessary paperwork
Direct customers and drivers to proper loading/unloading areas
Assist customers and drivers with loading and unloading recycling materials
Knowledge on how to operate a Forklift
Sort a variety of recycled materials

The ideal candidate will have/be:

Forklift experience
English required
Ability to see color spectrum
Good written and oral communication skills

Please email resume to: [Email hidden]

Call 313-763-9993.