Werkplek uitzend- en personeelsdiensten

11/06/2026

Job offer 📍 Uden
Insulation Worker

For one of our clients, we are looking for a worker for building insulation work.
The job consists of insulating different parts of buildings. It is physical work performed outdoors and at height.

💼 Conditions
• Salary from €20.47 gross per hour
• 40 hours per week
• Day shift
• Long-term cooperation

🔧 Responsibilities
• Insulating buildings (walls, roofs, floors)
• Preparing surfaces for insulation
• Working both indoors and outdoors
• Working on ladders and scaffolding up to 10 meters
• Maintaining a clean and safe workplace

✅ Requirements
• Experience in construction
• No fear of heights (up to approx. 10 m)
• Willingness to work on ladders
• Driving license B
• Communicative knowledge of English or Dutch

📞 Interested? Contact us directly 👇

📱 +31 6 22 120 160
📧 [email protected]

📱 +31 6 44 141 790
📧 [email protected]

11/06/2026

Job offer 📍 Gennep
Production Worker – Concrete Blocks

For one of our clients, we are looking for a production worker for work with concrete blocks.

The work takes place outdoors and consists of filling molds with concrete and distributing it evenly. It is physical work in a production environment.

💼 Conditions
• Salary €16,64 gross per hour
• 40 hours per week
• Day shift (07:00 – 16:00)
• Long-term cooperation

🔧 Responsibilities
• Filling molds with concrete
• Distributing and compacting concrete
• Removing steel molds after hardening
• Preparing blocks for transport
• Maintaining a clean and safe workplace

✅ Requirements
• Willingness to perform physical work
• Willingness to work outdoors
• Knowledge of English or Dutch

📞 Apply directly 👇

📱 +31 6 22 120 160
📧 [email protected]

📱 +31 6 23 560 834
📧 [email protected]

11/06/2026

Job offer 📍 Venlo (Limburg)
MIG/MAG WELDER – Black Steel

For one of our clients, we are looking for an experienced MIG/MAG welder for welding steel components used in construction machinery.

The work consists of welding parts for wheel loaders and excavators such as buckets, quick couplers, tilt components and rotating elements. Welding is performed on steel with a thickness of up to approximately 40 mm.

This is work on steel elements that requires precision and experience with multi-layer welding. High weld quality and the ability to work independently are important.

💼 Conditions
• Start: week 26/27
• Day shift
• 40 hours per week
• From €20.00 gross per hour (depending on experience)
• Long-term cooperation / possibility of permanent work

🔧 Responsibilities
• Welding steel using the MIG/MAG method
• Welding components for excavators and wheel loaders
• Working with steel up to 40 mm thickness
• Performing multi-layer welding

✅ Requirements
• Experience with MIG/MAG welding
• Accuracy and responsible working attitude
• Maintaining order and safety at the workplace
• Communicative knowledge of English, German or Dutch

📞 Interested?

📱 +31 6 22 120 160
📧 [email protected]

📱 +31 6 44 141 790
📧 [email protected]

11/06/2026

11/06/2026

Job offer 📍 Horst
Installation Technician – Water Systems (Greenhouses)

For one of our clients, we are looking for a technician to work on modern greenhouse installations.

The job involves installing water systems that are essential for the proper functioning of the greenhouse and plant growth. You will work at customer locations across different sites.

💼 Conditions
• Day shift
• 40 hours per week
• Salary depending on experience
• Long-term cooperation
• Possibility for development and training

🔧 Responsibilities
• Installation of water systems in greenhouses
• Starting up and adjusting systems (training possible at the beginning)
• Troubleshooting and performing service and maintenance work

✅ Requirements
• Education or experience in hydraulics
• Technical insight and ability to work independently
• Flexibility (also working outside regular hours / on-call duties)
• Knowledge of Dutch
• Driving license B

📞 Apply here

📱 +31 6 22 120 160
📧 [email protected]

📱 +31 6 44 141 790
📧 [email protected]

11/06/2026

Job offer 📍 Helden (Limburg)
Electrician (ZZP)

For one of our clients, we are looking for an electrician to support the electrical part of technical installations.

The company specializes in climate solutions for the agricultural sector, including livestock farming. These systems are responsible for ventilation, air purification, and regulating the flow of fresh air.

The work consists of assembling, connecting, and supporting installations.

💼 Conditions
• Project for approximately 2 months
• 40 hours per week
• Day shift
• Salary depending on experience
• Travel allowance

🔧 Responsibilities
• Assembling and preparing climate systems
• Connecting electrical components
• Commissioning climate systems
• Working from technical drawings and electrical diagrams
• Checking the proper functioning of installations
• Maintaining quality, order, and safety

✅ Requirements
• Experience in electrical engineering
• Ability to read technical diagrams
• Accuracy and ability to work independently
• Communicative knowledge of English or Dutch

📞 Apply directly 👇

📱 +31 6 23 062 867
📧 [email protected]

📱 +31 6 22 120 160
📧 [email protected]

11/06/2026

Job offer 📍 Heythuysen
Assembly Worker – Chalet Construction

For one of our clients, we are looking for an assembly worker for the construction of chalets and recreational homes. The company specializes in the production and finishing of high quality residential units that are fully built in their own workshop.

You will work in a structured production environment where quality, craftsmanship and careful handling of materials are central. This is precise assembly work where responsibility and accuracy are important. In this position, you contribute to the construction of complete chalets, from structural build up to final finishing.

💼 Conditions
• Day shift (6:30 – 15:30)
• 40 hours per week
• Salary based on experience
• Long-term cooperation
• Working within a stable and technical production company

🔧 Responsibilities
• Building wooden constructions
• Installing walls, floors and roof sections
• Performing interior and finishing work
• Working according to technical instructions
• Carefully handling materials and tools
• Maintaining a clean and safe workplace

✅ Requirements
• Experience in assembly or woodworking
• Technical insight
• Ability to work independently and accurately
• Responsible and careful working attitude
• Communicative knowledge of Dutch

📞 Contact

📱 +31 6 22 120 160
📧 [email protected]

📱 +31 6 44 141 790
📧 [email protected]

11/06/2026

Job offer 📍 Helden (Limburg)
Assembly Worker – Aluminium Elements (Trucks)

Do you have experience in assembly and want to work on parts for trucks?
For a technical company, we are looking for an assembly worker to assemble aluminium components (flaps) for trucks, trailers and semi-trailers.
In this position, you will work with components based on technical drawings and prepare parts for the next stage of the production process.

💼 Conditions
• Day shift
• 40 hours per week
• Salary depending on experience
• Travel allowance
• Long-term cooperation

🔧 Responsibilities
• Assembling aluminium parts for trucks
• Assembling components according to technical drawings
• Operating metalworking machines and an overhead crane
• Quality control of completed components
• Maintaining a clean and safe workplace

✅ Requirements
• Experience in assembly work
• Ability to read technical drawings
• Technical skills and accuracy
• Communicative knowledge of English or Dutch

📞 Apply directly 👇

📧 [email protected]
📱 +31 6 44 141 790

📧 [email protected]
📱 +31 622 120 160

11/06/2026

Job offer 📍 Horst (Limburg)
CONSTRUCTION FITTER – STEEL STRUCTURES

Do you have experience in steel construction, and do you enjoy working in a family business?

We are looking for a construction fitter to assemble steel structures for the construction sector. In this role, you will assemble, process and install steel constructions based on technical drawings. Accuracy, quality and safety are essential.

🔧Responsibilities
• Assembling steel structures
• Cutting, drilling and punching
• Working from technical drawings
• Checking measurements and quality

💼Conditions
• Day shift
• 40 hours per week
• €18.50–€19.00 gross per hour (depending on experience)
• Travel cost reimbursement
• Long-term cooperation

✅Requirements
• Experience in steel construction or construction work
• Strong technical skills and precision
• Ability to read technical drawings
• Communicative Dutch
• Driving licence B + own transport

📞 Interested?

📱 +31 6 22 120 160
📧 [email protected]

📱 +31 6 44 141 790
📧 [email protected]