Wat zijn de openingstijden?

Maandag 08:30 - 17:00 Dinsdag 08:30 - 17:00 Woensdag 08:30 - 17:00 Donderdag 08:30 - 17:00 Vrijdag 08:30 - 17:00

Yver People, Hallenstraat 10, Bladel (2026)

26/07/2024

Quality Inspector

Would you like to work for the world’s leading supplier in the aerospace industry? Do you have a keen eye for detail and a strong sense of responsibility for delivering quality? Then we’ve got an interesting offer for you! We are looking for a Quality Inspector.

In this position, you will be part of a dedicated team that ensures quality. You will do this by:
• Performing interim and final inspections
• Planning and executing delegated source inspections on behalf of the customer
• Guiding and conducting First Article Inspections and assessing the process, whether or not together with the customer
• Preparing and releasing DDPs (inspection records)
• Releasing final products in accordance with procedures (Certifying staff)
• Preparing, checking, handling, and deciding within authorization frameworks regarding NCs and customer complaints
• Monitoring the actual implementation of imposed measures
• Supporting "root cause" analyses according to the 4 / 8 steps methodology or equivalent
• Making recommendations for improvements

You are suitable for this position if you have:
• BSc work and thinking level
• Several years of relevant experience in the field of quality assurance in an international (aerospace) environment
• Proficiency in English, both spoken and written
• Good communication skills
• Knowledge of AS9100 and/or AS9110
• Knowledge of quality procedures, company rules, environmental regulations, VGW (safety, health, welfare)
• Ability to work independently as well as collaboratively
• Willingness to work in a 2-shift system

In case of your interest, you can expect:
• Long-term employment in a reputable aerospace company
• Salary between 17 and 20 € per hour
• Possibility of personal development
• Health insurance
• Free accommodation in a single room
• Free transport to work
• Pension contribution

Contact: +31 6 42 396 686 / [email protected]

19/06/2024

“Measuring is knowing.” As a 3D measurement technician, you play a crucial role in ensuring quality, safety, and reliability—key factors in the aviation industry! Using 3D measurement machines, you conduct interim, final, and repair inspections. This ensures quality throughout various stages of the production chain and prevents errors in subsequent production processes. The parts you work on are used in landing gears for the F-16 fighter jet, the Apache attack helicopter, the F35 Joint Strike Fighter (JSF), the MQ9 Reaper (drone), and the multipurpose NH90 helicopter.

As a 3D Measurement Technician, you regularly interact with your colleagues on the production floor and in engineering. You perform initial product inspections (IPIs) and provide advice on the adjustment of production machines. If a product deviates, you prepare a deviation report using the applicable drawings and procedures. You analyze and compare measurement data according to the relevant drawings and specifications and can explain how certain measurement results were achieved.

An overview of your tasks:
• During the daily start-up meeting, you discuss the planning and ongoing projects with your colleagues.
• Based on this planning, you know what preparations to make for initial product inspections (IPIs) or interim and final inspections.
• In case of deviations, you prepare a Non-Conformity Report (NCR) and assist in root cause analyses (RCAs).
• Additionally, you conduct measurements for First Article Inspections (FAIs) and document them according to AS9102 requirements or specific customer requirements.
• Finished? You finalize the product documentation and check one last time to ensure it is complete and accurate.

You are a match when:
• You have technical expertise through education and/or experience in the metal industry. You possess at least an mbo-level qualification and preferably have practical knowledge and experience with complex metal products.
• You have demonstrable theoretical and practical knowledge of control methods, measurement techniques, measurement tools, and equipment.
• Experience with a 3D measurement machine (Zeiss or Hexagon) using Calypso or PCDMIS software is a plus.
• You speak English
• You have a keen eye for quality, safety, and cost, and you are very precise.
• You take pride in what you deliver time and time again and in the production errors you help prevent.
• You own EU-citizenship

Contact: +31 642 396 686 / [email protected]

03/06/2024

Since 1984 our company has been designing and producing trucks in special configurations for the European truck market. We are the number one in Europe when it comes to adding axles, modifying cabins, and optimizing chassis layouts. Helping customers get the most out of their truck(s): that is the goal. The clients range from truck manufacturers like Mercedes-Benz, Scania, and DAF to large European bodybuilders like Kässbohrer Transport Technik and the Erwin Hymer Group. At the moment we are looking for people interested in work as Truck Interior Fitter.

Working on this position you are making the interiors of brand-new trucks suitable for customers all over the world. Assembling, disassembling, welding, sawing, upholstering; you do it all. Moreover, you work with many different materials, from wood and metal to plastic. Installing extra seatbelt bars to make a truck ready for a driving school. Or building a third sleeping bunk in a cabin so that a truck is fully suitable for 24-hour transport. These are just a few examples from your varied set of tasks. And all this in a professional automotive environment where there is a lot of attention for you. What you don't know well yet, we will teach you. There is also a great team of colleagues ready to support you.

Requirements:
• Experience in a similar role (Automotive Interior Fitter/Train Interior Assembler etc.)
• Communicative English language skills
• Good understanding of technical drawings
• Attention to detail.
• Ability to work in a team.

We Offer:
• Hourly wage ranging from €15 to €18.
• Accumulated holiday hours.
• Health insurance.
• Pension contribution.
• Accommodation in single rooms.
• Transportation.

Contact: +31 642 396 686 / [email protected]

28/02/2024

Our client specializes in the reconstruction and modification of heavy-duty trucks, adapting new trucks to the needs of entities such as fire departments. To achieve this, new vehicles that come to the company are first disassembled to be reassembled considering the planned modifications, which may include electrical installation, pneumatics, interior, and cabin structure. Different aspects require varied skills – from knowledge of automotive electronics through pneumatics and cabin finishing to its exterior appearance.

As a welder, you are primarily responsible for cabin modifications. Based on photos and drawings, you assess the practical possibilities of implementing the desired changes, possibly consulting them with more experienced colleagues, and then proceed with the work: where necessary, you trim and bend the body sheet metal (usually between 0.75 mm to 2 mm thick) to ultimately apply welds. You work independently but in collaboration with colleagues and under the supervision of a foreman.

Requirements:
• Experience as a MIG/MAG welder, preferably in the automotive industry
• Communicative knowledge of English
• Good understanding of technical drawings
• Experience working with thin materials
• Initiative and creativity in work
• Driver’s license
• Openness and a positive attitude

We offer:
• Full-time, permanent work on day shifts
• Remuneration between €15 and €17 per hour net
• Opportunities for professional development
• Health insurance
• Accumulated vacation hours
• Accommodation in a single room
• Pension contribution
• Transport

Contact: +31 642 396 686 / [email protected]

28/02/2024

Do you like action? A job where every day brings new challenges? And on top of that, do you have comprehensive knowledge in the field of electrical engineering? Do you have an understanding of both electrical installations and the latest smart solutions? We have an offer that might interest you.

Our client is a large company specialized in the maintenance and servicing of various installations – from electrical to alarm systems to IT systems. Currently, they are looking for someone to provide extra support to the team responsible for the Eindhoven region.

As a service technician, you will be responsible for independently performing service and maintenance work on various building-related installations. Whether it's service contracts for renowned clients like Boels or Alliance, or interesting environments like the High Tech Campus and TU/e, you are the technical expert who maintains, repairs, and modifies installations. You commission and adjust them, and provide advice where necessary. You also participate in emergency duty with a young and ambitious team. Additionally, you ensure the reporting of maintenance and emergency work carried out. Your work and attitude make sure that others have at least one less problem to worry about.

Requirements:
• Technical education in the field of installation technology/electrical engineering
• Minimum of three years of experience in a similar position
• Good command of English or Dutch
• Driver’s license
• Communication skills
• Flexibility
• Own accommodation in Eindhoven or nearby is welcome

We offer:
• Salary between €3200 and €4200 per month
• Company car
• Accumulated holiday hours
• Health insurance
• Pension contribution
• Accommodation if necessary

Contact: +31 642 396 686 / [email protected]

22/02/2024

For a client near Breda - a large, reputable company specializing in the production of pumps and valves - we are looking for CNC operators with experience. The work involves operating lathes and milling machines - manufacturing short series of structural components for pumps and valves, mainly from stainless steel. Machines: Mazak, DMU, and Gildemeister. Interface: Mazatrol, Heidenhein. Machining in three and five axes. Experience with conventional lathes and milling machines is also desirable.

Requirements:
• Good command of English
• Minimum of two years of experience
• Good understanding of technical drawings
• Knowledge of materials used
• Proficiency in Mazatrol and/or Heidenhein software
• Willingness to work in a three-shift system
• Driver's license preferred

We offer:
• Full-time employment in a reputable, international company
• Hourly wage ranging from €16 to €21 (depending on experience)
• Accumulated vacation hours
• Insurance coverage
• Pension contribution
• Accommodation in single rooms
• Transportation to work

Contact: +31 642 396 686 / [email protected]

16/02/2024

For a client from Eindhoven, subcontractor of ASML, we are looking for MIG/MAG and TIG welders.

As a welder, you will be responsible for fabricating structural components from black and stainless steel. You will work based on provided drawings, using them to independently produce the product. Your standard duties include interpreting welding methods (LBM), preparing edges and welding joints, selecting the appropriate process, performing welding forms, additional machining such as threading, drilling, plasma cutting, equipment maintenance, and quality checking. Experience in preparing machine parts in the hi-tech industry or food industry is desirable.

Requirements:
• Knowledge of technical drawings
• Welding experience
• Material knowledge
• Ability to take measurements
• Communicative English skills
• Precision and attention to detail
• Independence in work
• Ability to weld both MIG/MAG and TIG

We offer:
• Full-time employment
• Standard possibility of overtime
• Salary of €3000
• Accommodation in a single, furnished room
• Health insurance
• Reserved holiday hours
• Transportation to work

Contact: +31 642 396 686 / [email protected]

16/02/2024

Job Opportunity for Mechanics, Machine Assemblers, Automotive Electricians, and Pneumatics Specialists. Located near Oss, specializing in modifying heavy-duty trucks, tractor units, vans, and buses. As an axle assembler, you will be responsible for rebuilding vehicle axles and preparing them for further modifications. Your tasks will include interpreting provided schematics to install wiring and pneumatic components on the axles. Do you have experience in this field? Have you worked, for example, at DAF or Scania? Exciting job opportunities await!

Requirements:
• Experience in a similar role (machine fitter, mechanic, automotive electrician).
• Communicative English language skills.
• Preferred, but not required, education in machine construction or automotive mechanics.Good understanding of technical drawings.
• Knowledge of automotive electrical and pneumatic systems.
• Attention to detail.
• Basic welding skills are a plus.
• Ability to work in a team.

We Offer:
• Hourly wage ranging from €15 to €18.
• Accumulated holiday hours.
• Health insurance.
• Pension contribution.
• Accommodation in single rooms.
• Transportation.

Contact: +31 642 396 686 / [email protected]

Yver People

26/07/2024

19/06/2024

03/06/2024

28/02/2024

28/02/2024

22/02/2024

16/02/2024

16/02/2024

Adres

Openingstijden

Telefoon

Website

Meldingen

Contact

Snelkoppelingen

Delen

Type

Maandag	08:30 - 17:00
Dinsdag	08:30 - 17:00
Woensdag	08:30 - 17:00
Donderdag	08:30 - 17:00
Vrijdag	08:30 - 17:00