Morson Jobs Manchester

Morson Jobs Manchester Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Morson Jobs Manchester, Employment agency, Adamson House, 2 Centenary Way, Manchester.

Paint Sprayer - Bolton ---------------------------------------------------------------Rate--PAYE - £21.63 PAYE/hr (Risin...
13/07/2026

Paint Sprayer - Bolton
-------------------------------------------------------------
--Rate--
PAYE - £21.63 PAYE/hr (Rising to £22.63/Hr after 13 Weeks) + Holiday Pay
UMBRELLA - £29.02/hr Umbrella (Rising to £30.38/hr after 13 Weeks)
-------------------------------------------------------------
--Initial 12 Month Contract--
-------------------------------------------------------------
If of interest please reply here or get in touch through email with your current CV:
[email protected]
-------------------------------------------------------------

The Spray Painter will be responsible for carrying out manufacturing tasks within the Paint Department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives.
-------------------------------------------------------------
Essential skillset
-------------------------------------------------------------
• Possess experience in Preparation ( Masking ) and Paint Spraying.

• Demonstrated ability / willingness to certify own work in line with company quality standards.

• Maintain product certification and approval via regular audits.

• Possess a versatile skill base with the capability to apply these skills across a range of task.

• Be fully conversant with all equipment, and tools associated with the Paint Spraying process.

• Check and complete all paperwork associated with the Manufacturing data pack.

• Maintain to the highest level, workmanship standards and product quality.

• Ensure compliance with all associated procedures applicable to the manufacturing process.

• Maintain a safe working environment.

• Maintain a good housekeeping policy.

• Willing to contribute to an environment of process improvement.

• Be able to work in a team environment. Previous experience in the aerospace or defence industry would be desirable. Role requirements (skills, training and qualifications)

• Formal Qualification Surface finisher or equivalent Level 3.

• Experience as a skilled person.

• Formal further education certificate to Level 3.
-------------------------------------------------------------

Nights Maintenance Operator –Bolton£33 per hour12 Month Contract -------------------------------------------------------...
13/05/2026

Nights Maintenance Operator –Bolton
£33 per hour
12 Month Contract
-------------------------------------------------------------
If of interest please reply here or get in touch through email with your current CV:
[email protected]
-------------------------------------------------------------
PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for BPSS level UK Security Clearance. Both the role and client site have ITAR nationality restrictions
-------------------------------------------------------------
Role Overview:
Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term.
-------------------------------------------------------------
Our client is looking for a reliable and proactive General Maintenance Operator to work NIGHTS supporting the Calibration and Maintenance department in ensuring the facility and equipment remain safe, compliant, and operational

Rates: £28.35 per hour Umbrella or £21.12 per hour (holiday pay on top of hourly rate) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE

Nights are Monday-Thursday, 10 hours/night (7.30pm – 6am)
-------------------------------------------------------------
Responsibilities include:

• Carry out routine facility compliance activities including:
 ESD (Electrostatic Discharge) testing throughout the facility
 Electrical Safety Testing of equipment and portable appliances
 LEV (Local Exhaust Ventilation) filter changes and associated

Maintenance tasks:

•Support the Calibration & Maintenance department with general maintenance activities across the facility.
•Assist with planned preventative maintenance activities and respond to general maintenance requirements as needed.
•Maintain accurate records and ensure all documentation and paperwork are completed correctly and on time.
-------------------------------------------------------------
Skills and Experience:

•MUST have Manufacturing experience
•Previous maintenance experience is desirable but not essential
•Ability to follow procedures and complete documentation accurately
•Good communication skills and the ability to work as part of a team
•Positive attitude with a willingness to learn new skills and develop technically
-------------------------------------------------------------
Development & Progression:

This role offers opportunities for progression within the Calibration & Maintenance department. Training and development will be provided to support the successful candidate in developing skills and experience in:
• Mechanical calibration
• Electrical calibration
• Use of test equipment

-------------------------------------------------------------
Further Details:

Rates:
£24.78 per hour Umbrella or £18.46 per hour PAYE (role is inside IR35) rates rise after 12 weeks to £26.12 per hour Umbrella or £19.46 per hour PAYE

Duration:
Ongoing rolling contract role, with an initial period of 12 months (extension and permanent prospects very strong)

Location BL5 1ED
Hours: Nights – Monday-Thursday, 10 hours/night (7.30pm – 6am)

Manufacturing Bid Lead£33 per hour12 Month Contract -------------------------------------------------------------If of i...
12/05/2026

Manufacturing Bid Lead
£33 per hour
12 Month Contract
-------------------------------------------------------------
If of interest please reply here or get in touch through email with your current CV:
[email protected]
-------------------------------------------------------------
A leading defence organisation is seeking a Manufacturing Bid Lead to support new business activity and deliver industrial transfer and offload programmes within a complex engineering environment.
-------------------------------------------------------------
--Key Responsibilities--
- Produce competitive and compliant manufacturing bids for industrial transfer work packages.
- Deliver industrial transfer projects, ensuring performance to time, cost and quality, with clear progress reporting and issue resolution.
- Lead the manufacturing offload process, working with manufacturing and procurement teams to identify suppliers and develop business cases.
- Implement manufacturing strategy and industrial policy aligned to new business pipelines and technology roadmaps.
- Support new business capture activity and maintain strong internal and supplier stakeholder relationships.
- Contribute to continuous improvement of manufacturing processes and functional excellence initiatives.
-------------------------------------------------------------
--Skills & Experience--
- Proven project management experience delivering fixed‑cost programmes within a matrix organisation.
- Background in manufacturing, engineering or production environments.
- Strong stakeholder management and communication skills.
- Proactive, decisive and commercially aware, with the ability to balance strategic and day‑to‑day delivery.
- Security clearance or eligibility to obtain clearance will be required.
-------------------------------------------------------------

Electronic Test EngineerLocation:Bolton, Greater Manchester, EnglandPlease note that in order to be considered for this ...
07/05/2026

Electronic Test Engineer
Location:
Bolton, Greater Manchester, England

Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions

Role Overview:

Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term.

Rates: £27.54 per hour PAYE or £37 per hour Umbrella

Monday - Friday 37 hours +

The role will be responsible for Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level

Specific responsibilities include:

Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations.
Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions.
Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level.
Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme.
Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements.
Test Engineering representative at Defect Review Board meetings to ensure efficient progress of equipment and quality notifications towards corrective action. Role requirements (skills, training and qualifications)
Role requirements (skills, training and qualifications)

HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test.
A good understanding of measurement and test principles, and associated test equipment.
An understanding of the typical CADMID product lifecycle for test equipment is desirable.
An understanding of RF and microwave technology at subsystem level would be an advantage.
An understanding of Environmental testing (including ESS) would also be an advantage.
Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements.
Proven analytical and problem solving skills, with strong attention to detail.
The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives.

Please send CV to [email protected] if of interest

Opportunities available within a growing Aerospace & Defence recruitment business with offices in Preston and Salford.W...
07/05/2026

Opportunities available within a growing Aerospace & Defence recruitment business with offices in Preston and Salford.

We’re currently hiring for:
Recruitment Consultant (Experienced)
Trainee Recruitment Consultants
Recruitment Resourcers

We’re particularly interested in speaking with individuals who:
Demonstrate strong communication skills and confidence on the phone
Thrive in a fast-paced, target-driven environment
Are motivated by progression and earning potential

If of interest could I ask that you reply with your current CV and on confirming suitability one of my colleagues will be in touch.
[email protected]

Mechanical Calibration Engineer - Bolton£32 - 35 per hour12 Month Contract ---------------------------------------------...
13/04/2026

Mechanical Calibration Engineer - Bolton
£32 - 35 per hour
12 Month Contract
-------------------------------------------------------------
If of interest please reply here or get in touch through email with your current CV:
[email protected]
-------------------------------------------------------------
Our client, a trusted partner of the UK Ministry of Defence, is recruiting an HNC/HND level Mechanical Engineer to work at their state-of-the-art facility in Bolton, Greater Manchester

The role forms part of our clients Calibration & Maintenance Team working as technical support for the metrology department
-------------------------------------------------------------
**In order to be considered for this opportunity you will need to hold a HNC/HND level qualification AND be eligible for SC (Secret Level) UK Security Clearance as both the role and client site have ITAR nationality restrictions**
-------------------------------------------------------------
Duties includes:

- Supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance

- You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work

- You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department

- You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations
-------------------------------------------------------------
Skillset/experience required:

- Minimum qualification: HNC/HND in Mechanical Engineering
- Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required
- Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required
- Experience and knowledge in dimensional calibration required
- Experience and knowledge of using and creating programs for coordinate measuring machine required
Good knowledge of temperature and pressure calibration desirable
Able to deal with multiple issues, tasks and priorities concurrently
-------------------------------------------------------------

Manufacturing Engineer NC/CMM Programmer Machining - Warton£24.78PH = £3.60PH = £28.38PH PAYE or £33.24PH Umbrella 12 Mo...
12/03/2026

Manufacturing Engineer NC/CMM Programmer Machining - Warton
£24.78PH = £3.60PH = £28.38PH PAYE or £33.24PH Umbrella
12 Month Contract
-------------------------------------------------------------
NC Programmers – Do you have experience in multi axis machining, or CMM programming?
We are looking for engineers with experience in NC and CMM programming of details machining.
-------------------------------------------------------------
Engineers should have experience in machining principles and using current CAD/CAM systems. This could also include metrology and robotics programming.
As an NC programmer you should have a good understanding of design for manufacture, dimensional management and process planning.
You should have experience of CATIA V5 and multi-axis NC Autodesk Powermill / Powershape or equivalent and understand and have experience of simulation systems such as CGTECH Vericut (V8).
-------------------------------------------------------------
The Manufacturing Engineer will translate design information in the form of CAD models, drawings, material and manufacturing process specifications into digital NC processes as part of the Manufacturing Engineering Process.
-------------------------------------------------------------
Typical duties include (but are not limited to):

•Minimum of HNC or recognised apprenticeship in Manufacturing Engineering.

•Good knowledge and experience of basic manufacturing processes and Engineering principles.

•Experience in specific manufacturing processes related Machining (beneficial to have Assembly NC experience)

•Engineering Toolset knowledge, CATIA V5, PLM (or equivalent Product Data Manager), SAP CAM, or SFM (Shop Floor Manager), CDP and VAS. CATIA V5 basic operation and multiaxis NC, Siemens NX Powermill and Powershape (Autodesk products) Simulation via CGTECH Vericut (V8), LK CAMIO Inspection or equivalent

•Experience of Geometric Dimensional Management & Tolerancing (GD&T)

•Proven history of managing development and implementation activities

•Ability to manage projects to cost and schedule

•Ability to manage unplanned events and work to tight deadlines.

•Good interpersonal skills and ability to communicate effectively at multiple organisational levels

-------------------------------------------------------------
Knowledge:

•In Depth Knowledge of Machining / Fabrications detail manufacturing process.

•Engineering Toolset knowledge, NX / CATIA V5, PLM (or equivalent Product Data Manager), SAP CAM (Computer Aided Manufacture) or SFM (Shop Floor Manager), CDP and VAS

-------------------------------------------------------------
Skills:

•Computer literate with good knowledge of standard office IT packages

•Sub Assembly engineering and manufacturing experience in the aerospace (or equivalent standard) industry would be beneficial

•Ability to manage unplanned events and work to tight deadlines.

•Good interpersonal skills and ability to communicate effectively at multiple organisational levels
-------------------------------------------------------------
Qualifications:

•Engineering Degree or HNC/HND or recognised apprenticeship and significant experience in the aerospace (or equivalent standard) industry
-------------------------------------------------------------
If of interest please reply here or get in touch through email with your current CV:
[email protected]

PCB Assembly - Bolton £18.46 - 19.46 per hour12 Month Contract ---------------------------------------------------------...
11/03/2026

PCB Assembly - Bolton
£18.46 - 19.46 per hour
12 Month Contract
-------------------------------------------------------------
PCB Assembly - General Operator required for our defence client in Bolton

This Operator will be going into the Plastics team at a missile manufacturing facility.

This involves working with small hand tools and masking tape, manually applying protective resin coatings to assembled circuit boards.

Excellent Dexterity is a must have, and any experience working with small brushes, either in their personal time or professional life, would be an excellent skillset
-------------------------------------------------------------
Responsibilities include:

- Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales.
- Contribute to the efficient movement of work and information in the manufacturing area.
- Adhere in all activities to agreed standards and behaviours.
- Comply with all health and safety requirements.
- IPC 610 certified / trained preferred.
-------------------------------------------------------------
Skillset/experience required:

- Plastics experience
- Dexterity for fine work.
- Read and interpret layouts.
- Follow instructions.
- Willing to work flexible shift patterns.
- Attention to detail.
- Work on own with minimal supervision.
- PC literate
-------------------------------------------------------------
The role is subject to full Security Clearance (SC) with no caveats. Due to the specialist nature of the role, it is expected that the individual may need to view confidential material subject to “UK Eyes Only” and therefore the vacancy is only available to UK nationals only.
-------------------------------------------------------------

If of interest please reply here or get in touch through email with your current CV:
[email protected]

Manufacturing Engineer - Bolton Umbrella: £35 per hour PAYE: £26.92 per hour + holiday payWorking Pattern: 37hrs/week, f...
11/03/2026

Manufacturing Engineer - Bolton
Umbrella: £35 per hour
PAYE: £26.92 per hour + holiday pay
Working Pattern: 37hrs/week, full-time onsite
12 Month contract ( Likely to be extended )
Employer: Defence manufacturer
-------------------------------------------------------------
Morson is currently recruiting a Manufacturing Engineer on behalf of our defence client based in Bolton.

This is an excellent opportunity to join a high-performing manufacturing environment, supporting complex products across multiple projects. You will be a key member of the Manufacturing Engineering team, ensuring products are built efficiently, right first time, and to budget.

- Compile, maintain and update Manufacturing Instructions

- Design, commission and prove associated tooling

- Support industrial validation activities, including FMEAs, FAIs and related processes

- Resolve technical issues arising during the manufacturing process

- Implement route card changes resulting from rework activities

- Manage configuration control by embodying design modifications into Manufacturing Instructions

- Support the Non-Conformance process using SAP

- Work collaboratively within a multi-disciplinary team to support manufacturing delivery
-------------------------------------------------------------
Skills & Experience Required

- Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) AND

- Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.) AND

- Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved OR

- Degree in a relevant Engineering subject.

- Ability to interpret design drawings and produce clear Manufacturing Build Instructions for skilled and semi-skilled operators

- Experience of electronic sub-assembly manufacture through to system-level builds

- Knowledge of assembly processes for small/miniature electro-mechanical actuation systems

- Strong team-working capability with the ability to contribute in a collaborative environment

- Clear understanding of customer requirements and the ability to respond effectively

- Ability to work to defined company processes and procedures

- Strong communication skills, able to engage at all levels of the organisation

-------------------------------------------------------------
Please note: Due to the nature of work, we can only accept applications from sole British nationals, along with copies of relevant qualifications.
-------------------------------------------------------------
If of interest please reply here or get in touch through email with your current CV:
[email protected]

Mechanical Inspector - Bolton £28.35 - 28.35 per hour12 Month contractEmployer: Defence manufacturer -------------------...
17/02/2026

Mechanical Inspector - Bolton
£28.35 - 28.35 per hour
12 Month contract
Employer: Defence manufacturer
-------------------------------------------------------------
Morson are working with a Defence Manufacturer who are looking for a Mechanical Inspector based at their site in Bolton.
-------------------------------------------------------------
Responsibilities:

• Certify the product in line with the product certification procedure
• Examining for correct assembly
• Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc.
• Inspect for physical damage
• Intermediate inspection checks non product certification
• Monitor product certification operators
• Check and complete all paperwork associated with the manufacturing data pack
• Control defect items via segregation from good product
• Raise and maintain relevant data records/defect reports
• Produce relevant inspection/quality control documentation/history sheets
• Care for and use specialised inspection tools
• Maintain product certification and approval via regular audits
• Ensure compliance with all associated procedures applicable to the manufacturing process
• Ensure inspection times are met
• Possess a versatile skill base with the capability to apply these skills across a range of tasks
• Maintain to the highest level, workmanship standards and product quality
• Maintain a safe working environment
• Maintain a good housekeeping policy
• Willing to contribute to an environment of process improvement
-------------------------------------------------------------
Skillset/experience required:

• Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21or HNC
• Several years’ experience as a skilled person
• IPC 610 certified / trained preferred
-------------------------------------------------------------
If of interest please reply here or get in touch through email with your current CV:
[email protected]

Address

Adamson House, 2 Centenary Way
Manchester
M501RD

Opening Hours

Monday 8:30am - 5:30pm
Tuesday 8:30am - 5:30pm
Wednesday 8:30am - 5:30pm
Thursday 8:30am - 5:30pm
Friday 8:30am - 5:30pm

Telephone

+441617071516

Website

Alerts

Be the first to know and let us send you an email when Morson Jobs Manchester posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Morson Jobs Manchester:

Shortcuts

Share

Category